Maintenance / Disposal; Lubricating The Cutting Mechanism; Automatic Energy Saving; Disposal Of The Machine - Intimus FlashEx Instrucciones De Uso

GB
Has the motor been overloaded?
See „Motor protection", p. 13.
NOTE!
In many cases, restarting the machine helps:
1. Switch o the machine once.
2. Turn the machine on again.
If none of these test points apply, please notify your
intimus service partner.
5

Maintenance / Disposal

NOTE!
Regular maintenance by your intimus service
partner is recommended.
5.1 Lubricating the cutting mecha-
nism
Cross-cut cutting mechanisms must be lubricated re-
gularly after a certain period of operation. As a remin-
der, the pilot lamp (Fig. 1/7) lights up after 20 min of
operation.
Lubricate the cutting mechanism:
1. Open the safety glass (Fig. 3/1).
The pilot lamp (Fig. 1/6) lights up.
The pilot lamp (Fig. 1/7) ashes.
The reverse button's pilot lamp (Fig. 1/6) a-
shes.
2. With the included oil bottle, dispense a thin streak
of oil from left to right onto the cutting mecha-
nism.
3. Press the reverse button (Fig. 1/5).
The pilot lamp goes out.
4. Close the safety glass again.
The pilot lamp goes out.
The pilot lamp continues to ash.
The motor starts automatically to distribute the oil on
the cutting rollers. The cutting mechanism moves for-
ward and backward a few times during the lubrication
process. The or LED indicators ash depending on
the direction of rotation.
The motor then switches o . The pilot lamp (Fig. 1/7)
goes out. The machine is now ready for operation
again. To reorder oil bottles, see „Accessories", p. 14.

5.2 Automatic energy saving

If the machine is not in use, it automatically turns o
after about 10 min. The
button (Fig. 1/1) goes out to indicate "ready for opera-
tion." To reset, brie y press the function button.
14
LED display on the function
Translation of the Original Operation Manual
Übersetzung der Originalbetriebsanleitung

5.3 Disposal of the machine

Always dispose of the machine at the end of its
service life in an environmentally responsible
way. Do not toss any part of the machine or its
packaging into the garbage.
6

Technical Data

intimus FlashEx
Particle size*: 4 x 15 mm (Cross-Cut)
Cutting capacity/hour*: 100 Mobile phones
500 USB sticks
1500 CDs
1000 Floppy
Working width: 165 mm
Input voltage: 230 V/50 Hz, 240 V/50 Hz, 120 V/60 Hz
Fusing (idle): 230 V/50 Hz = 16 A
240 V/50 Hz = 13 A
120 V/60 Hz = 20 A
Noise level: approx. 65 dB (A)
Output: 1.9 kW
Dimensions (WxDxH): 580 x 610 x 980 mm
Weight: approx. 116 kg
* Particle size/cutting capacity may vary depending on shredding material and
ambient conditions.
7

Accessories

Designation
Plastic bag, 440 x 330 x 950 x 0,05 mm
Oil bottle, 110 ml
NOTE!
When reordering special accessories and to
purchase spare parts, please contact your inti-
mus service partner.
Order No.
99977
88035
93902 1 01/16