Feed Slot" Operator Unit; Turning The Machine On; Initialization Process; Starting The Shredding Process - Intimus FlashEx Instrucciones De Uso

La destructora de datos
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

GB
= "Lubricate cutting mechanism" pilot lamp
7
(Fig. 1/7)
Lights up if the machine needs to be lubricated.
NOTE!
If the safety glass for the oiling process is open,
the lamp starts ashing.
= "Material jam" pilot lamp (Fig. 1/8)
8
Lights up if the cutting mechanism is jammed.
= "Cutting mechanism ready" / "Cutting mecha-
9
nism not ready" curved pilot lamps (Fig. 1/9)
Lights up green if the cutting mechanism can be
fed. Lights up red if the cutting mechanism cannot
be fed.

3.2 "Feed slot" operator unit

1
1
Safety glass
2
Feed ap
Fig. 2 intimus FlashEx feed slot
= Safety glass (Fig. 2/1)
1
The machine only runs if the safety glass is closed.
= Feed ap (Fig. 2/2)
2
Feed the material through the device's feed ap.
This starts the cutting mechanism.

3.3 Turning the machine on

Brie y press the function button (Fig. 1/1).
The
LED display on the function button lights
up to indicate "ready for operation."
You can now feed the machine.

3.4 Initialization process

NOTE!
During the initialization process, please do not
feed any material into the shredder!
Start the initialization process (when the machine
is o ):
1. Brie y press the function button Fig. 1/1.
The machine turns on.
2. Brie y press the forward button Fig. 1/2.
93902 1 01/16
The initialization process starts. The cutting me-
chanism switches ve times between forward
and backward operation.
The cutting mechanism stands still. You can now
feed the machine.

3.5 Starting the shredding process

DANGER!
Risk of injury! Damage to the machine!
CAUTION!
Material jam! Damage to the machine!
2
Feeding through the feed ap (Fig. 3/2)
Slip small data carriers, like USB sticks, mobile phones
000087
or SSD disks, through the feed ap into the cutting me-
chanism.
The shredding process starts automatically.
After destroying the data carrier, the machine
shuts o automatically.
1
Safety glass
2
Feed ap
Fig. 3 Feeding through the feed ap
Feeding through the safety glass (Fig. 3/1)
1. For larger data carriers, e.g. mini tablets, push the
safety glass back and feed the data carrier into the
cutting mechanism.
2. Close the safety glass again.
3. Brie y press the forward button Fig. 1/2.
The shredding process starts.
After destroying the data carrier, the machine
shuts o automatically.
Remove batteries from the device befo-
re shredding it!
Feed the data carriers into the machine
individually, one after another! This lets
the intimus FlashEx reach its best per-
formance.
If too much material has reached the
cutting mechanism, see „Material jam",
p. 13.
1
FlashEx
2
000084
11
Tabla de contenido
loading

Este manual también es adecuado para:

176-4cFlashex 000086

Tabla de contenido