Hitachi NH 90AB Instrucciones Y Manual De Seguridad página 5

5. ALWAYS WEAR EAR AND HEAD
PROTECTION.
Always wear ear protection to protect
your ears from loud noise.
Always wear head protection to protect
your head from flying objects.
6. STORE NAILER PROPERLY.
When not in use, the Nailer should be
stored in a dry place. Keep out of reach
of children. Lock the storage area.
7. KEEP WORK AREA CLEAN.
Cluttered areas invite injuries. Clear all
work areas of unnecessary tools, debris,
furniture, etc.
8. NEVER USE
FLAMMABLE LIQUIDS OR GASES.
The Nailer produces sparks during
operation.
Never use the Nailer in sites containing
lacquer, paint, benzine, thinner, gasoline,
gases, adhesive agents, and other
materials which are combustible or
explosive.
9. KEEP VISITORS AWAY.
Do not let visitors handle the Nailer.
All visitors should be kept safely away
from work area.
10. DRESS PROPERLY.
Do not wear loose clothing or jewelry as
they can be caught in moving parts.
Rubber gloves and nonskid footwear are
recommended when working outdoors.
Wear protective hair covering to contain
long hair.
11. NEVER USE NON RELIEVING COUPLER
ON NAILER.
If a non relieving coupler is used on the
Nailer, the Nailer can remain charged
with air after disconnecting and thus will
be able to drive a fastener even after
disconnecting.
SAFETY
IN PRESENCE
— Continued
WARNING
The Nailer and air hose must have a hose
coupling such that all pressure is
removed from the Nailer when the
coupling joint is disconnected.
12. CONNECT AIR HOSE BEFORE NAIL
LOADING
FOLLOWINGS.
Check for air leakage and abnormal noise.
Use of the Nailer in an abnormal
condition may cause accidents or injuries.
If any abnormality is detected, ask your
dealer or HITACHI authorized service
center for repair.
13. KEEP ALL SCREWS AND COVERS
TIGHTLY IN PLACE.
Keep all screws and covers tightly
OF
mounted.
periodically.
Never use the Nailer if parts are missing
or damaged.
14. KEEP FACE, HANDS AND FEET AWAY
FROM FIRING HEAD AT ALL TIMES.
Never place your face, hands or feet near
the firing head.
15. PLACE
WORKPIECE.
Do not drive fasteners on top of other
fasteners or with the Nailer at too steep
of an angle; the fasteners can ricochet
and hurt someone.
16. BE CAREFUL OF NAILER REPULSION.
When a nail is shot against a hard
material, the Nailer may bounce back. Do
not bring your face close to it.
17. DO NOT DRIVE FASTENERS INTO THIN
BOARDS OR NEAR CORNERS AND
EDGES OF WORKPIECE.
The fasteners can be driven through or
away from the workpiece and hit
someone.
— 5 —
AND CHECK
Check their
NAILER PROPERLY
English
THE
condition
ON