Settings; Display System; Adjust General Settings; Adjust Video Settings - Better BT5400 Manual De Operaciones

Display System

1. Touch the upper left corner to display main menu.
2. Touch [ Settings ].
The settings menu is displayed.
3. Touch the upper left corner of the screen to exit.

Adjust General Settings

1. Touch [ General ], if necessary.
2. Touch to highlight an option.
3. Touch the option to adjust it.
General settings Options
Radio region Select one that matches your location.
Local
Radio range
Distance
Off
10s
Blackout
20s
Dimmer mode Night/Dark/Normal/Bright
On
Beep
Off
Calibration Start
Key color You can select the key color.
4. Touch the upper left corner of the screen to exit.
Calibration
When the touch operation is not sensitive or valid, you should
calibrate the touch screen through calibration setting function.
Adjust the response positions of the touch panel as followings:
1. Press the [ Calibration ] option on the setup menu to enter.
2. Touch [ Start ] to enter.
3. Press and hold the center of [ + ] for 2 seconds, the [ + ] will
move automatically.
4. Aim at center of [ + ], follow the path as shown of the figure, after
steps from 1 to 5, the system will exit calibrating automatically.

Adjust Video Settings

1. Touch [Video].
2. Touch the option to select:
Video settings Options
On
Parking
Off
3. Touch the upper left corner of the screen to exit.
When in Park "On" mode, the screen will display "WARNING" [if you play the video]. The above
warning screen will prevent the driver watching images.

Settings

Description
Select strong signal of Local/Distance range.
Screen remains on continuously.
Screen goes blank (standby mode) after 10 seconds of
inactivity. Touch the screen to exit standby and view the
display.
Screen goes blank (standby mode) after 20 seconds of
inactivity. Touch the screen to exit standby and view the
display.
This setting dims the LCD screen when the vehicle's
headlights are turned on. Four settings are pre-defined.
Turn on the beep sound. Each time you press a button,
the unit beeps.
Turn off the beep sound.
Calibrate the touch screen.
Description
Disable video
Enable video
EN-18