Rimax Baby RB203 Manual De Usuario página 18

User Manual
Camera Unit System
1. Connect one end of the transformer
to the camera unit system (as shown
in Figure 4) and connect the other
end of the transformer to the power
supply.
2. Press ON/OFF button to start the
camera unit system.
Placement Type
Stand Type: The stand can be placed on 4 angles (i.e., front, rear, right and
left). adjust the desired angle and position.
Wall Mount Type: Fix a screw into the wall and leave a distance of about
8-9 mm away from the wall. Hang the camera unit system.
Velcro Type: Put the velcro belt through the camera unit system base and
tie it to the cylinder (Note: it cannot be tied to the crib).
Stand type
Baby Kangoo RB203
EN
Figure 4
Velcro belt type Wall mount type
18