Installation Instructions - Rimax Baby RB203 Manual De Usuario

User Manual

3. Installation instructions

Monitor Unit System
1. Raise the hanging buckle, remove the
battery cover (as shown in Figure 1), and
then insert the li-ion battery. Make sure the
battery contacts are well connected to the
metal contact points on the chassis, then
close the battery cover.
2. Use the supplied transformer (as
shown in Figure 2), connect it to the
transformer outlet of the Monitor
vision system and the other end to
the power supply.
3. The system will automatically enter
into charging mode [the green display
indicator will automatically light up].
When using the RB203 for the fi rst
time, it is important to charge the unit
for at least 4 hours until the charging
process is over. lf the monitor unit
system is off , the monitor can also be
charged. The green display indicator
will light up while charging and will
go off after the charging is has been
completed.
4. Press ON/OFF button to start the
monitor unit.
Placement Type
Raise the hanging buckle (as shown in
Figure 3) and then rotate the lock to fi x it.
Baby Kangoo RB203
EN
Figure 1
Figure 2
Figure 3
17