Tabla de contenido
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
The TCD 1062 needs no particular maintenance.
To ensure optimum performance from the TCD 1062, once a year check the cables and the electrical connections.
Clean the TCD 1062 with a soft cloth dampened with water.
Do not use chemical or abrasive products to clean the TCD 1062.
TECHNICAL DATA
MODEL
MAIN SWITCH COMMAND CHARACTERISTICS
Supply voltage (1)
Quiescent current (2)
Maximum current absorption (3)
THRUSTER COMMAND CHARACTERISTICS
Current capacity of right or left
single thruster commands.
Supply voltage (1)
Quiescent current (2)
Maximum current absorption
GENERAL
Operating temperature
(4)
Protection rating
EMC Standard
Weight
Dimensions including frame (L x L)
(1)
With supply voltage less than 8 Vdc the remote control can reset.
(2)
Typical value with remote control disabled.
(3)
Typical value with remote control enabled.
(4)
Excluding the back of the remote control (IP20).
®
QUICK
RESERVES THE RIGHT TO MODIFY THE TECHNICAL CHARACTERISTICS OF THE EQUIPMENT AND THE CONTENTS OF THIS MANUAL WITHOUT PRIOR NOTICE.
TCD 1062 - REV001A
MAINTENANCE - TECHNICAL DATA
(3)
TCD 1062
from 8 to 31 Vdc
10 mA
40 mA
4 A
from 8 to 31 Vdc
10 mA
95 mA + absorption of the contactor coil
from -20 to +70 °C
IP 65
EN 60945 - FCC PART 15 RULES 47
110 g
78 x 131 mm
GB
19
Tabla de contenido
