Cleaning Carpets; Cleaning Upholstery - POLTI Vaporetto Handy 15 Manual De Instrucciones

Ocultar thumbs Ver también para Vaporetto Handy 15:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 47
3.4 Deactivate the steam lock (5) and conti-
nue with steam delivery, pressing the steam
trigger on the handle of the steam hose.
3.5 Clean the floors by moving the brush.
Before removing the cloth from the brush,
wait a few minutes to allow the cloth to cool.
WARNING:
Do
not
without the cloth.
WARNING: For additional safety, test steam
delivery on a hidden part, leave the steamed
part to dry to ensure that no changes in co-
lour or deformations have occurred.
4. CLEANING RUGS
WARNING: Before cleaning fabrics with
steam, consult the manufacturer's instruc-
tions and always carry out a test on a hidden
part or on a sample of the material. Allow
the steamed part to dry to make sure that
no changes in colour or deformations have
occurred.
4.1 Make sure that Chapter 1 has been fol-
lowed and connect the accessories as indica-
ted in Chapter 2.
4.2 Connect the extension tubes to the steam
hose and the floor brush to the extension tu-
bes.
4.3 Deactivate the steam lock (5) and conti-
nue with steam delivery, pressing the steam
trigger on the handle of the steam hose.
4.4 Pass the brush without cloth over the sur-
face to bring dirt to the surface.
4.5 Attach the supplied cloth to the floor brush.
4.6 Go back over the surface to collect the
dirt.
Before removing the cloth from the brush,
wait a few minutes to allow the cloth to cool.

5. CLEANING CARPETS

WARNING: Before cleaning fabrics with
steam, consult the manufacturer's instruc-
tions and always carry out a test on a hidden
part or on a sample of the material. Allow
the steamed part to dry to make sure that
no changes in colour or deformations have
occurred.
5.1 Make sure that Chapter 1 has been fol-
lowed and connect the accessories as indica-
ted in Chapter 2.
use
the
appliance
5.2 Connect the extension tubes to the steam
hose and the floor brush to the extension tu-
bes.
5.3 Ensure that the steam lock on the handle
is deactivated (5).
5.4 Attach the supplied cloth to the floor bru-
sh, locking it in place with the special lever
hooks. Proceed rapidly and without pressing
over the carpet, running the brush forward,
backward and sideways without pausing too
long at the same point.
If the carpet is very dirty or saturated with
cleaning products, do not to insist too much.
Results will be evident only after a few uses
of Vaporetto.
6. CLEANING GLASS, WINDOWS
AND TILES
WARNING: To clean glass surfaces during
cold weather, preheat the windows starting
to vacuum from a distance of about 50 cm
from the surface.
6.1 Make sure that Chapter 1 has been fol-
lowed and connect the accessories as indica-
ted in Chapter 2.
6.2 Ensure that the steam lock on the handle
is deactivated (5).
6.3 To clean windows and mirrors, steam the
surface thoroughly to dissolve the dirt. Apply
the window cleaner frame to the small brush
(12) and go back over the surface to eliminate
the dirt, without dispensing steam. The exten-
sion hoses can be connected to the handle to
reach high surfaces.
6.4 To clean tiles, attach the cap to the small
brush and pass over the surface, dispensing
steam, in order to eliminate the dirt. The ex-
tension hoses can be connected to the handle
to reach high surfaces.

7. CLEANING UPHOLSTERY

(mattresses, sofas, car interiors,
etc.)
WARNING: Before cleaning leather or fa-
brics with steam, consult the manufacturer's
instructions and always carry out a test on a
hidden part or on a sample of the material.
Allow the steamed part to dry to make sure
that no changes in colour or deformations
have occurred.
| 27 |
Tabla de contenido
loading

Tabla de contenido