H.Koenig ENGL18 Manual De Instrucciones página 3

OPERATION
It is recommended that operate the kettle several times following the below
instruction and discard off the water before first use. This will remove the material or
dust remained in the appliance, which is caused by the manufacturing process.
1. Open the lid and fill water into the kettle. Then replace the lid otherwise the
automatic power cut-off function will not work once the water has been boiled.
Caution: The filled water level must be between the "Max" and "Min" level as
indicated on the housing. Too less water will do damage to the heat element and if
the water is overfilled, boiling water may spill.
2. Replace the kettle on the Power Base and connect to power supply. Place the kettle
in a way that the spout of kettle is facing away from you.
3. Press the switch and the the indicator light will switch on. The water will begin to
heat up. DO NOT open the lid while the water is boiling.
Caution: Ensure that switch is clear of obstructions and the lid is firmly closed，The
kettle will not turn off if the switch is constrained or if the lid is left open.
4. Power will be cut off automatically and Switch will be back once water has been
boiled. And the lamp will be off.
5. Lift the kettle from the power base and then pour the water.
NOTE: operate carefully when pouring the water from your kettle，as boiling water
will scald.
6. The boiling process can be terminated at any time by lifting the kettle off the Power
Base or pressing the Switch.
Caution:
- Never operate the appliance empty. In the event of this case occurred, the
thermal cut-off inside the kettle would operate to cut off power automatically.
Unplug the appliance and let it completely cool down.
NOTE：Ensure the power is turned off while the kettle is not in use.