Setup Instructions - Intex ECO 7220 Manual Del Propietário

(260IO) MODEL ECO 8220/8230 & 7220/7230 SALTWATER SYSTEM ENGLISH 7.5" X 10.3" PANTONE 295U 08/15/2014
• The Saltwater System requires a separate filter pump [700~3000 gph (2650~
11355 lph)] to drive the water and function properly.
• The Saltwater System must be installed as the last piece of pool equipment in the
water return line to the pool as displayed in Drawing #1. This location extends the
life of the titanium plates.
1. Assemble the above-ground-pool (AGP) and its filter pump according to their installation
instructions.
2. Take the Saltwater System and its accessories out of the packaging.
3. Place the Saltwater System in line after the filter pump.
4. Connect the connector hose (7) to the Saltwater System inlet.
Connecting the system to pump and pool with 1-1/4" (32mm) connections/hoses:
The saltwater system features 1-1/2" (38mm) connections. It is accordingly supplied with
adaptors A (1) and B (8) for connecting to the small 1-1/4" (32mm) diameter connections/
hoses. Install as follows:
Drawing #1
WATER TO
POOL
ID 1-1/4" (32mm)
HOSE
1
SAVE THESE INSTRUCTIONS

SETUP INSTRUCTIONS

IMPORTANT
SWIMMING POOL
SALTWATER SYSTEM WITH E.C.O.
(ELECTROCATALYTIC OXIDATION)
WATER FROM
FILTER
PUMP
(32mm) HOSE
8
7
8
260
English
A
POOL
ID 1-1/4"
Page 6