Springline Erika Manual De Instrucciones página 18

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 61
After unpacking, leave the
appliance in its final positi-
on for at least 2 hours. The cooling
agent inside the appliance must
first sink to the bottom, as the
compressor could otherwise be
damaged. The manufacturer will
assume no liability in the event of
incorrect assembly, improper or
incorrect use, or repairs carried out
by unauthorised third parties.
WARNING: Risk of fire!
The cooling circuit contains
the cooling agent isobutane
(R600a). Although it is a natural,
environmentally-friendly gas, it is
also flammable. Make sure that the
cooling circuit is not damaged
during transport or while setting up
the appliance. The cooling agent
(R600a) is flammable.
If the cooling circuit is damaged:
• Keep away from open flames and
ignition sources.
• Thoroughly ventilate the room in
which the appliance is located.
• Do not continue using the
appliance.
18
BEFORE USING THE APPLI-
ANCE FOR THE FIRST TIME
• Remove all transport safety and
packaging parts and keep them
away from children – danger of
suffocation!
• Let Erika stand for at least 2 hours
before using it for the first time
to allow the cooling agent in the
compressor to sink to the bottom.
• Erika should be cleaned before
first use and after longer periods
of non-use. When doing so, fol-
low our instructions on cleaning
and maintenance.
• Place the appliance on a level and
dry surface.
Tabla de contenido

Solución de problemas

loading

Tabla de contenido