Device Description; Starting Up The Device - Weller WFE 2ES Manual De Uso

WFE 2ES

4 Device description

The Weller WFE 2ES is designed as a soldering fume extraction
device for working surface extraction for the following properties and
functions:
− It has a powerful maintenance-free turbine and is perfectly
suitable for continuous operation in industry.
− Individual arrangement of the pipe system with max. 2 pipe
nozzles.
− 3-stage filter (fine dust, HEPA filter and activated carbon filter)
tuned to the standard composition of soldering smoke.
− High filter efficiency: when using tested HEPA filters of class H12,
according to EN 1822 the filtration efficiency of the filter set in
delivery condition is 99.5 %, at a particle size of 0.18 µm (values
apply only if original parts are used).
4.1 Technical data WFE 2ES
Dimensions
Weight
Voltage
Electr. power
Max. vacuum
Max. conveying
capacity
Fine dust filter
Compact filter

5 Starting up the device

When installing the device, ensure that the exhaust air can be
conveyed unobstructed out of the exhaust air opening.
1. Carefully unpack the device.
2. Connect the soldering fume extraction device WFE 2ES using a
- flexible extraction hose
or
- directly with the vacuum pipe system.
3. Prior to commissioning, check that the mains voltage matches the
specifications on the nameplate.
4. If the mains voltage is correct, connect the WFE 2ES to the
mains.
5. Switch on the device at the mains power switch (7).
L x W x H (mm): 320 x 320 x 395
9 kg
230 V, 50 Hz
120 V, 60 Hz
115 VA
1800 Pa
220 ㎥/h
Stage 1: fine dust filter F5 absorbs
40-60 % fine dust > 1 mm.
Stages 2+3: HEPA filter class H12 (99.5 %
with particle up to approx. 0.18 µm) is
combined with an activated carbon filter.
5-8