Initial Operation - Reer PIA Manual De Uso

Initial operation

1.
2.
3.
4.
5.
Operation
Make sure that all packaging was removed from the device.
Fill the kettle with water up to the MAX-marking on the inside of the
device.
Continue as described in chapter „Usage of kettle".
After boiling, pour away the water.
Repeat the procedure. Then your device is ready for operation.
Open the lid
1.
Open the lid by pressing the opening button.
Filling the kettle
2.
Do not exceed the maximum fill level of 0.5 l (MAX marking inside the
kettle).
Close the lid
3.
Push down the lid without pressing the opening button until it
snaps into place with a click. Check whether the lid is closed.
Operating the appliance
4.
Connect to power after filling the device with water.
Switch on:
Press down the on/off switch in the handle in the upper switch area.
The operating light is on.
Switch off:
Your kettle will boil and switch off automatically. The operating light
goes out.
The heating can be interrupted manually at any time or continued by
pressing the on/off switch in the upper lower area.
Disconnecting from the power supply
5.
Always unplug the kettle after use.
- 12 -