and turn it clockwise until the arrow reaches the "closed" symbol. [Fig C3]
• DO NOT leave water inside the reservoir between one use and another.
• Empty the water from the reservoir (13) after each use.
D
ARNING: To fill the water reservoir (13) during use and clean you must
ALWAYS turn off the steam cleaner and repeat the filling operations.
USED AS A CLEANER FOR FLOORS/CARPETS
• Fully unwind the power cable (11). To do so, turn the upper cable hook (10A)
downwards.
• Secure the cable in the slot of the upper cable hook to prevent the cable from
hindering the cleaning operations.
• Connect the power cord (11) to the mains.
• Press the on/off button (4). The steam ready LED (6) will light up RED and after a
few seconds it will become GREEN so as to indicate that the boiler is ready for use.
[Fig D1]
• Rest one foot on the brush (8) and pull the handle (1) toward you to tilt the Steam
Mop body.[Fig D2]
• Produce steam by briefly pressing the steam mop button (2). [Fig. D3]
• DO NOT emit steam continuously so as to not to wet the surface that is to be
cleaned excessively.
• The steam takes a few seconds to penetrate through the cleaning cloth.
• Rub the surface that is to be cleaned by inclining the product to about 45° [Fig. D4]
• Switch the product off by pressing the on/off (4) button again [Fig.D1]