auna Verticalo SE Manual De Uso página 16

EN
16
OPERATION
USB operation
1. Press USB ON/OFF button to set the unit to the USB mode, USB
indicator light will be on.
2. Insert the USB disk, the unit will begin to play the first song of the USB
disk automatically. And the indicator light will flash.
3. Press the Forward skip button
the song.
4. To pause playback, press the Play/Pause button
will be on. Press the Play/Pause button
5. To stop playback, press USB ON/OFF button, the indicator light will go
off.
NOTE: When playing USB (the USB indicator light is on), only the
Volume control knob on the front panel can be used.
Tuntable operation
1. Rotate the ON/OFF knob to turn on the unit.
2. Rotate the SPEED CONTROL KNOB to the correct speed (33 ½, 45 oder
78 rpm) for the select record.
3. Take out the MAGNETIC ADAPTER, put a record on the TURNTABLE
lightly, then put the MAGNETIC ADAPTER back to fix the record.
4. Remove the stylus protector from the stylus assembly.
5. Release the tonearm lock, use the Cue Lever to lift up the tonearm.
6. Move the tonearm over the record where play is desired to begin. Use
the Cue Lever back to the down position, the tonearm will descend
slowly onto the record and begin to play.
7. Rotate the volume control knob to get desired sound level.
8. At the end of the record, the tone arm will stop automatically.
Line-out operation
This system includes a set of LINE OUT jacks which allow you to record from
the Radio or Phonograph of this system to an external recording device
such as a cassette recorder, Mini-Disc, etc. ln any play mode, insert the
audio cable(not include) into the matching "LINE OUT" socket of the unit,
operate as usual, and through the speakers of A, we can hear the sound
exported from.
the Backward skip button
the indicator light
again to resume playback.
to select