Pairing Procedure; Out Of Range Alert - PNI B5500 Manual De Usuario

Parent unit description and using instructions
Solid green: day mode
Solid orange: night mode
Red/Green flashing:
out of range
Red flashing: low battery
Volume +/-

Pairing procedure

The two units included in the pack are default paired. If, for any reason, the two
units can't communicate, even when they are in range, follow the procedure bellow to
pair them:
- press and hold for 5 sec the on/off button on both units at the same time
Day/night mode
The baby monitor has an energy saving function, mostly used during the night,
that will only enable transmission from the baby unit if a sound is detected, otherwise the
units are quiet. To use this enable Night mode.
Attention! In night mode the out of range alert is disabled.

Out of range alert

LED Indicator
The two unit are too far apart
Red/Green flashing
PTT button
- press and hold
to talk to the baby unit
Constant beep
3
Day/Night mode button
- long press to enable
day/night mode
On/Off button
- long press to turn
the unit on/off
EN