1byone O00QH-0514 Manual De Instrucciones página 4

EN
4. Operation:
DE A. Turning the receiver on/off:
Be sure to switch the button to the "ON" position
FR
when using the Alarm kit.
You can turn off the alarm when needed by
ES
switching the button to the "OFF" position.
IT
B. Selecting the work mode:
The receiver can work as a doorbell or work as an
alarm.
To select the working mode, switch the button
on the side of the receiver to one of the
following positions:
a. Chime - The receiver will work as a doorbell and
play a high volume "Ding Dong" sound.
b. Low - The receiver will work as a doorbell and play
a low volume "Ding Dong" sound.
c. Alarm - The receiver will work as an alarm and play
an alarm sound.
- 05 -
C. Selecting the notification mode:
The receiver will notify after the PIR sensor has
detected a car or someone passing by with a
chime/alarm sound, flashing LED, or chime/alarm
sound and flashing LED at the same time.
To select the notification mode, press the Sound
and Flash
button on the side of the receiver. The
receiver will display the current notification mode.
Keep pressing the Sound and Flash button and
stop when you have reached the preferred mode.
D: Pairing additional PIR sensors/receivers to the
alarm system:
Up to 5 PIR sensors can be paired with one
receiver. You can also extend the alarm system
with any number of receivers. This is only possible
when the PIR sensor and receiver are working on
the same frequency. Pair additional PIR sensors/re-
ceivers using the same pairing process as
described below.
The following pairing instructions are relevant to
receiver SKU O00QH-0512 and PIR sensor SKU
- 06 -
EN
DE
FR
ES
IT