Package Contents; Parts Names - 1byone O00QH-0514 Manual De Instrucciones

Thank you for purchasing 1byone Wireless Alert
EN
Alarm. Please read this instruction manual before
DE
use to ensure safe operation.

1. Package Contents:

FR
2 x PIR sensors
ES
4 x Wall plugs
1 x Instruction manual
IT
If any package contents are visibly damaged or missing,
please immediately contact 1byone Support Center at
https://www.1byone.com/Support for assistance.

2. Parts Names:

(1)
(2)
(1) LED indicator
(3) DC power input jack (4) Door chime and alarm switch
(5) On/Off switch
(7) Pairing button
(9) LED indicator
1 x Receiver
4 x Screws
(3)
(5)
ON
OFF
(6)
CHIME
LOW
ALARM
(7)
(4)
(8)
(9)
( 2) Speaker
(6) Sound and flash switch
(8) PIR detector
- 01 -
Parameters:
Voltage of receiver DC 6V ( 3 x Type C batteries or adapter)
Voltage of PIR sensor DC4.5V ( 3 x AAA batteries)
PIR sensor's frequency 433.92MHz+100KHz
PIR sensor's detecting angle 45 degree
5-8m/12-15ft
PIR sensor's detecting distance
Operating range 100m/300ft (without obstacles)
Receiver: ＜1.2W PIR sensor: ＜0.06W
Power consumption
Receiver's ring volume Over 100dB within 0.5m/1.6ft
Working temperature -20°C ~ 50 °C
3. Power Supply:
PIR sensor:
The PIR sensor is powered by 3 x AAA batteries,
please insert the batteries using the following
procedure:
・Remove the screw on the back of the PIR sensor
with a screwdriver. Next, remove the battery
compartment cover.
・Insert 3 x AAA batteries into the battery
compartment, using the correct polarity to
eliminate the danger of fire.
・Replace the battery compartment cover and
tighten the screw.
- 02 -
EN
DE
FR
ES
IT