CICSA ZETA ZT 800x500 Manual De Instrucciones página 16

TMU English - User guide
ELECTRONIC CONTROL FOR TOWEL RADIATORS
Operating mode icons
- Fil-Pilote
- Comfort
- Night
- Antifreeze
- Timer 2h
- Chrono
IGNITION / STAND BY
Press the [On/Stand-by] key to turn on the device or to enter the "Stand-by" mode.
When activated, the bottom part of the display shows the current time, while the configured operative mode and
the temperature are shown in the upper part. When in "Stand-by" mode current time, day of the week and the
message: "Stb" are displayed.
NOTE: When the device goes into "Stand-by" mode it beeps twice for 0.5s.
EXAMPLE:
1 - "COMFORT" MODE (
"COMFORT" Temperature is the one used for the "Chrono and Comfort " modes.
2 - Ttemperature "NIGHT" is the temperature used for "Night and Chrono Modes". The wished temperature can
be adjust pressing the buttons (+) and (-). The range of configurable temperature is between 7ºC to 32ºC.
IMPORTANT: The temperature in"Night" mode must be below the temperature of the way "Comfort".
The temperature in "Night" mode could be configurated between a value of 7ºC and temperature formed in
"Comfort"mode -0,5ºC.
16
Dry-towel models ZT, ZX, PUKITA, TUBÓN, DIJON, CUADRO, KARNAK, VERONA and ELFIE
Indicator of active
heating element
Comfort / Night bar
(Chrono mode)
Function:
Open Window Detection
) and NIGHT MODE (
Example in "COMFORT" mode
Key-lock
Day of the week
)» two different levels of temperature can be established.
Example in "STAND-BY" mode
Con gured temperature
24h Indicator
IR receiver indicator
Clock