Connecting The Control Unit To The; Caddy - Polaris 9300 Sport Manual Del Usuario

7. Place two (2) caps on the wheels as shown in
fi gure 9.
Figure 9. Attaching Wheel Caps
8. Attach the support blocks to the caddy using four
(4) screws as shown in Figures 10 and 11.
For the Polaris 9300 Sport and 9300xi Sport, see
Figure 10 for orientation and positioning of the
blocks.
For the Polaris 9400 Sport, see Figure 11 for the
correct orientation and postioning of the blocks.
x4
Figure 10. Attaching the Support Blocks
(Polaris 9300 Sport & 9300xi Sport)
x4
Figure 11. Attaching the Support Blocks
(Polaris 9400 Sport)
9. The transport caddy is now ready to use as shown
in Figure 12.
Figure 12. Transport and Storage Caddy Assembled

3.3 Connecting the Control Unit to the

Caddy

1. Position the control unit over the control unit hook
on the caddy.
2. Slide the locking plate clips into the control hook
and line up the screw holes. Refer to Figure 13.
1
Figure 13. Position the Locking Plate Clips
3. Secure the locking plate using Phillips head
screws. Do not overtighten. Refer to Figure 14.
2
Figure 14. Secure the Locking Plate
Page 7