Diagnostics; Setting The Security Password - Lutron QS Guía De Instalación Y Funcionamiento

Reloj temporizador
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 49

Diagnostics

If you are having trouble with your control unit and
call Lutron Technical Support, you may be asked for
diagnostic information about your unit.
1. Enter programming mode and
Diagnostics
select "Diagnostics". Press
the OK button to accept.
Device SN
2. Use the Master buttons to
Link Info
highlight the option that
will display the required
information. The info screen
can display the device serial
Link info
number, link information,
code version, or USB status.
There is also an option to
reset the USB connection (do
this only if asked to by Lutron
Technical Support).
3. Exit programming mode.
®

Setting the Security Password

A four-digit password can be set as a security feature to protect the
programming settings on the GRAFIK Eye QS control unit.
1. Enter programming mode
Diagnostics
2. Select "Diagnostics" and press the OK button to
Reset USB
accept.
Password
3. Select "Password" and press the OK button to
accept.
4. Select "Set Password" and press the OK button to
Password
accept.
5. You will be prompted to input a four-digit password.
Set Password
Use the Master buttons to scroll through the
characters (uppercase letters and numbers 0 through
Disable
9 only). The character you are currently changing
in the password will appear underlined on the info
Password
screen. Press OK to select the desired character, and
4 / 4
repeat for the remaining characters.
The info screen will confirm that your setting has been
D
1: ABCD
saved.
6. Exit programming mode.
Saved
When you re-enter programming mode after setting
Enter Password
your password, you will be prompted to enter your
password. Use the method in Step 5 above to select
4 / 4
D
and enter each character.
1: * * * *
Note: The characters will appear on the info screen as
To disable your password, follow Steps 1 through 4 of
Password
"Setting the Security Password", and select "Disable"
on the Password menu.
Set Password
Disable
QS Timeclock Installation and Operation Guide 21
asterisks.
Tabla de contenido
loading

Este manual también es adecuado para:

Qsgr-tc-3s-wh

Tabla de contenido