Setting The Logo - Odys Slim 5L Pro-II Manual Del Usuario

3
Now change the time setting. Select
the setting required using the control
buttons
the value using the
buttons.
Press OK to confirm the values
after you have finished making the
settings.
The date and time can only be displayed by the camera in
playback mode. They cannot be printed.
The time settings are saved by an internal backup battery.
Therefore, the time settings are not lost when the two replaceable
AAA batteries are removed. The settings are not lost until the
internal backup battery is flat.

5.14 Setting the LOGO

The LOGO is the startup image which is shown on the display when the
camera is activated. This allows the user to define individual images. To
do so, proceed as follows:
1
Press the
photo Press the menu button and select the "Set Logo" item.
2
After setting the logo, select the option "Play Logo" in the
playback mode menu. There are two options:
• Activate: The image selected by the user is used as the startup
image.
• Deactivate: The preset image is the startup image.
The startup image is not deleted when images are deleted or the
memory is formatted. To set another startup image, you must
repeat the procedure described above.
28
and , and then change
and
button to start playback mode. Open the required
control