Makita CL105D Manual De Instrucciones página 8

You may insert its protrusion of any
side into the lower groove of the dust
stopper.
008932
4. Overlap the frame of dust stopper with
that of the dust pack.
008933
5. Place the dust stopper and the dust
pack together into the cleaner cavity in
the same direction of arrow on the
dust stopper. Insert them all the way
into the slots in the cleaner cavity.
1
014736
6. Place the entire container part of the
dust pack inside the tool itself.
1
014737
7. Close the front cover completely.
1. Lower groove
1
1. Cleaner cavity
1. Front cover
CAUTION:
Install the dust stopper with the dust
•
bag or dust
operation without proper installation of
them, or using broken or ripped one, it
may allow dust to get into the motor.
This may result in motor failure.
Do not fold the cardboard at its
•
opening when installing the paper pack.
Never throw away the dust stopper
•
because it needs to be used repeatedly
whenever either the dust bag or the
dust pack is used.
The paper pack for the cleaner is an
•
important component for maintaining
the tool performance. If you use the
other genuine paper pack, it may cause
smokes or ignition.
OPERATION
014743
To connect attachments, such as nozzle,
twist and insert them to ensure secure
connection during use. To disconnect
attachments, twist and remove them.
Cleaning (Suction)
Nozzle
1
014726
Attach the nozzle to clean off tables, desks,
furniture, etc. Nozzle slips on easily.
8
pack properly.
1. Nozzle
Tool