Makita CL105D Manual De Instrucciones página 11

TROUBLE SHOOTING
Before asking for repairs, conduct your own
inspection first. If you find a problem that is
not explained in the manual, do not attempt
to dismantle the tool. Instead, ask Makita
Authorized Service Centers, always using
Makita replacement parts for repairs.
Symptom
Weak suction
power
Not working
014744
NOTE:
Do not attempt to repair cleaner by
•
yourself.
Disposing cleaner
A Li-ion battery is built into this cleaner.
Always remove it before disposing of the
cleaner.
Removing built-in battery
CAUTION:
Never remove the built-in battery from
•
the cleaner except when disposing of the
cleaner. The battery will be damaged or
a battery short-circuit could result.
Do not touch the terminals with any
•
conductive material.
Avoid storing battery unit in a container
•
with other metal objects such as nails,
coins, etc.
Do not expose battery unit to water or rain.
•
Do not disassemble or alter battery unit.
•
The cleaner must be removed from the
•
supply mains when removing the
battery.
1. To remove the rear cover, push it in
the direction of the arrow.
Area to be investigated
Is dust bag or paper pack full of dust ?
Is dust bag clogged ?
Is paper pack clogged ?
Is battery cartridge exhausted ?
Is battery cartridge exhausted ?
Empty dust bag or paper pack.
Dust down or wash the dust
bag.
Replace paper pack.
Charge the battery.
Charge the battery.
1
014815
2. Slide the
Disconnect the lead wires from the
battery by pressing the connector in the
direction of arrow shown in the figure.
1
014816
3. Then slide the battery unit completely.
11
Fixing method
1. Rear cover
built-in battery
1. Connector
2. Lead wires
2
halfway.