Installing The Strainer - Transform QL652 Manual Del Usuario

Installation (continued)

INSTALLING THE STRAINER

1 . Apply a ring of plumber's putty to the underside of the
strainer flange.
2 . Insert the strainer body into the sink .
3 . Assemble the rubber gasket, friction washer and locknut onto
the strainer body from under the sink .
4 . Hand tighten the locknut . Do not overtighten the locknut as it
may split or deform the strainer body .
5 . The strainer basket can be placed in the strainer body once
the utility sink is installed .
QL652
8
Sealant
Basket
Strainer body
Rubber gasket
Friction washer
Locknut