Overhead Rigging - JB Systems PARTY BAR Manual De Instrucciones

ENGLISH
IMPORTANT! For your own safety we strongly recommend to connect this optional switch!
THERE WILL BE NO LASER OUTPUT WHEN THE INTERLOCK INPUT IS NOT USED!
Temporary solution: install the spare connector on the laser. (see picture)
14. ON/OFF KEY ACTIVATED SWITCH: used
to switch the laser unit on/off. Use the keys to
make sure only a skilled operator is able to
switch the laser on.
15. SENSITIVITY KNOB: turn this knob anti-
clockwise to decrease the sensitivity or turn it
clockwise to increase the sensitivity of the
integrated microphone.
16. CONTROL PANEL: Used to select the different functions of the
bar, see further to learn how to operate the unit.
17. INTERNAL MICROPHONE: The built-in microphone is used to synchronize the sound controlled shows
to the beat of the music.
18. DISPLAY: shows all the necessary information about settings and working modes.
19. M-DMX INPUT: Please note that this USB-connector is NOT used for updates or to connect the unit to a
PC! Instead this USB-connector makes it very easy to add wireless DMX to the unit! Just add the
(optional) WTR-DMX DONGLE from BRITEQ
to connect other DMX-controlled equipment to the DMX-output so you can share the wireless DMX
function with all connected units! No extra settings to be made in the setup menu, just follow the
procedure in the user manual supplied with the WTR-DMX DONGLE from BRITEQ
WTR-DMX DONGLE is available from WWW.BRITEQ-LIGHTING.COM (order code: 4645)

OVERHEAD RIGGING

 Important: The installation must be carried out by qualified service personal only. Improper
installation can result in serious injuries and/or damage to property. Overhead rigging requires
extensive experience! Working load limits should be respected, certified installation materials
should be used, the installed device should be inspected regularly for safety.
 Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging
and servicing.
 Locate the fixture in a well ventilated spot, far away from any flammable materials and/or liquids. The
fixture must be fixed at least 50cm from surrounding walls.
 The device should be installed out of reach of people and outside areas where persons may walk by or be
seated.
 Before rigging make sure that the installation area can hold a minimum point load of 10times the device's
weight.
 Always use a certified safety cable that can hold 12 times the weight of the device when installing the unit.
This secondary safety attachment should be installed in a way that no part of the installation can drop
more than 20cm if the main attachment fails.
 The device should be well fixed; a free-swinging mounting is dangerous and may not be considered!
 Don't cover any ventilation openings as this may result in overheating.
 The operator has to make sure that the safety-relating and machine-technical installations are approved by
an expert before using them for the first time. The installations should be inspected every year by a skilled
person to be sure that safety is still optimal.
CAUTION EYE DAMAGE: Always position the laser in a way that prevents the
audience from looking directly into the laser beams. The installation should assure that
the beam will not strike the audience.
JB SYSTEMS®
®
and you will get wireless DMX! Moreover you will be able
5/87
USER MANUAL
®
. The separate
PARTY BAR