Gima Visio 2000 Manual De Uso página 11

11 ENGLISH
CLEANING
The housing can be wiped/clean with a cloth moistened with alcohol. Glass Surfaces can be
cleaned with a cotton wool bud in the same way.
OPERATING THE HANDLE
Push button (A) in Fig.3 inward and rotate the knob clock wise which will turn the power on
and the lamp will light up. This position is indicated by a RED indicator comes into view.
To switch off the instrument rotate the knob counter clock wise till an audible sound is heard.
Changing the batteries:
Unscrew the end-cap (E) and shake out the old batteries.
Insert new batteries as Shown in Fig.3. Take care that the poles point in the right direction
as indicated i.e. During insertion the positive end comes first in case of both rechargeable
and regular batteries.
CLEANING
The handle can be cleaned with a cloth soaked with disinfectant however it cannot be dipped
into liquids.
Straight/Curved Illuminator
Various attachment such as mirrors and tongue depressors can be attached to the illuminator.
Align the slot on the distal end of illuminator and slide backward until it stops turn left to lock
the pin as shown in fig.6. To Remove reverse the above process.
Features:
- Stainless Steel construction.
- Equipped with durable and easy locking system.
- To be used for Tongue Depressor & Plain mirror 20.0mm.
- Autoclavable and Disinfectable.
CLEANING AND STERILIZATION
The illuminators can be cleaned with a cloth moistened with Alcohol/IPA. These can be
disinfected and sterilized by any conventional method. Autoclaving is allowed.
Tongue Depressor & Plain Mirror
Features:
- Made from resilient thermoplastic material.
- Smooth and shiny surface ensure easy cleaning.
- Easy Fixation on Illuminators.
CLEANING AND STERILIZATION
The illuminators, plain mirror and tongue depressor can be cleaned with a cloth moistened
with Alcohol/IPA. These can be disinfected and sterilized by any conventional method.
Autoclaving is allowed.
Changing of Lamp:
For illuminator unscrew the lamp in counter clockwise direction until free. Replace the lamp
and verify that lamp is sufficiently tightened before use as shown in Fig.7