Service; Checking The Battery Life; Cleaning The Tester - AgraTronix MT-PRO+ Manual Del Operador

CHECKING THE BATTERY LIFE

1. The tester is powered with two 9 volt alkaline
batteries. The left battery (A) powers the backlight
circuit. The right battery (B) powers the system.
2. The tester will display a percentage of battery life left
in both the system and backlight batteries.
3. To select the battery check while in the grain menu
press the "UP OR DOWN" buttons until "OPTIONS"
is selected then press the "ENTER" button.
4. The "OPTIONS" menu will now be displayed, press
the "UP OR DOWN" buttons until "BATTERY" is
selected then press the "ENTER" button.
5. The tester with then display the percentages
remaining for the system and backlight battery.
6. The tester system functions will operate if no backlight battery is installed or
if it is low.
NOTE: When you first turn on the tester if the system battery is at or below 5%
the tester will automatically flash the battery life on the display to let you know
the battery needs to be replaced. If the backlight battery is fresh and the system
battery needs replacing, the backlight battery can be used to operate the system
by moving it to the system battery location.

CLEANING THE TESTER

1. Remove cap and wipe out inside of the tester with a dry paper towel.
NOTE: Grain may become lodged in threads of cap and should be removed
with a small blade screwdriver.

Service

20-1
B A