Installing Your Sl-Dante-Mix Card - PRESONUS SL-Dante-MIX Option Card Guía De Instalación Y Conexiones

2.1 Customizing Dante Stream Labels
2
2.1
The SL-Dante-MIX card was designed to work with any StudioLive AI-
series mixer. As a result, the Dante streams are generically labeled.
You can customize your Dante streams using the Dante Firmware
Update Manager and the Dante firmware file for your mixer model.
You can download this software application and the appropriate
Dante firmware for your mixer from your My PreSonus account.
6

Installing Your SL-Dante-MIX Card

Customizing Dante Stream Labels
1. Power off your mixer and
disconnect all outputs for your safety.
2. Remove the option card currently
installed in your mixer.
3. Insert your new SL-Dante-MIX
option card and tighten the screws.
1. After downloading and installing the
Dante Firmware Update Manager,
download the customized Dante
firmware for your mixer and save
it to the same computer.
2. Connect your mixer and your
computer to your Dante network.
3. Open the Dante Firmware
Update Manager.