Customizing Your Dante Settings; Routing Audio To The Digital Returns - PRESONUS SL-Dante-MIX Option Card Guía De Instalación Y Conexiones

Customizing Your Dante Settings

4
Your new SL-Dante-MIX card provides several customizable user settings
for configuring you the StudioLive AI-series mixer on a Dante network. For
complete Dante setup instructions, please refer to the Dante Controller User
Manual, which is available as a downloadable PDF from www.Audinate.com.
NOTE: you must update the firmware on your StudioLive AI-series
mixer to enable Dante functionality.

Routing Audio to the Digital Returns

4.1
Each Digital Return on your StudioLive AI-series mixer
can be sourced either from the Dante network or from
an audio stream on your computer over FireWire.
Inputs
SL-AVB-MIX Installation and Hookup Guide
The Digital Returns
on your StudioLive AI
mixer will default to
source from the
network, rather than
FireWire. On
StudioLive AI-
console mixers, this
can be changed from
the Channel Info
page. When you
select a channel, the
Channel Info page
will be shown on the
screen.
Press the Next button until the Digital
Return option is highlighted, then use
the Value knob to change the setting
to FireWire.
11