Veridian Healthcare 11-525 Manual De Instrucciones página 9

USING YOUR STEAM INHALER
HOT STEAM INHALATION THERAPY
6. Remove the secondary fill tank, Fig. 4.
7. Add 80 ml of tap/distilled water OR saline water
to the larger capacity side of the secondary fill
tank (the side where the suction tube feeds),
Fig. 5.
NOTE: Follow physician direction when using
saline treatments. Never use saline water with a
salt concentration higher than 7%.
8. Replace the secondary fill tank, making sure the
suction tube feeds into the larger side of the fill
tank. The left/smaller side of the secondary fill
tank is an overflow tank to collect water. Never
place liquid in this side of the tank.
9. Check to make sure the nozzle and suction tube
are in place and that the suction tube is not bent,
Fig. 6. Reattach the top cover to the body of the
unit.
10. Place the smaller, mouth/nose mask onto the
extension tube and adjust the extension tube to
the desired height, Fig. 7. The height/length of
the tubing will not affect the steam output or
treatment time.
Incorrect Correct
Fig. 4
Take care
to fill the
correct
side of the
tank
Fig. 5
Fig. 6
Fig. 7
ENGLISH • 9