MoJack EZ Manual Del Usario página 14

STEP 12
Raising Lift Arm to Locking Position
• Raise the Lift Arm until the Carrier Locking Pin drops into the
Safety Hole.
• The Carrier Locking Pin automatically drops into the Safety Holes as
the Carrier passes the Safety Holes on the Tower when raising.
• Note: When lowering the Lift Arm, the Carrier Locking Pin
must be held out by the operator until it clears the bottom
Safety Hole.
STEP 13
Preparing the Mower for Service
• Place wheel chocks (not included) behind the back tires of the mower.
• Now apply the parking brake on the mower.
• The Carrier Locking Pin must be locked into one of the two
Safety Holes.
STEP 14
Lowering the Mower
• Remove wheel chocks.
• Release the parking brake.
• Mower must be in neutral.
• Pull and hold the Carrier Locking Pin
out and turn the Crank Handle counter
clockwise until Wheel Pads are firmly
on the ground. The Carrier Locking Pin
must be pulled out until it clears the
bottom Safety Hole.
MoJack EZ Lift
Operating Instructions
14
Wheel Chock
Carrier
Locking
Pin
Pull Out
to Unlock
and Lower
Safety Hole
Tower Locking Pin
Carrier
Locking
Pin
Pull Out
to
Unlock
and
Lower
Safety Hole
Safety Holes