Tabla de contenido
English
►
Open the battery compartment
closure.
►
Replace the battery.
►
Close the battery compartment.
6.3
Battery pack
Connecting the battery pack to the mo
bile dust extractor
► Activate the mobile dust extractor's
automatic mode (see the operating
instructions for the mobile dust ex
tractor).
► If you have used the cordless power
tool already, ensure that the battery
pack's capacity indicator has gone
out so that you can connect it (in cer
36
tain cases, this can take a few sec
onds).
► Press the connection button on the
mobile dust extractor [2-1] or on the
remote control [1-1] once.
The LED on the mobile dust extractor
shows a slowly rotating flashing blue
light and the mobile dust extractor is
ready for connection for 60 seconds.
► Switch on the cordless power tool.
The mobile dust extractor starts up and
the battery pack is connected until the
mobile dust extractor is manually
switched off.
If a second battery pack is con
nected to the mobile dust ex
tractor, the connection to the
first battery pack is lost.
Tabla de contenido
