Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Use
Radio transmission between the photoelectric cells and the stationary unit eliminates the
need for any type of wiring between one or more protected passageway and the electronic
programmer.
The system is made up of:
SAFECDR8
SAFEDECX8
ZRA3.0-3.8-W
ANQ800-1
Memory module (MM)
Located on the stationary unit, the module is furnished with a non volatile EEPROM type
memory that allows you to memorise up to 8 pairs of photoelectric cells in the stationary
transceiver unit. The codes are maintained in this module even in the absence of power.
TRANSCEIVER ANTENNA INSTALLATION
Maximum range: 30 metres in open space.
It is good practise to position the receiver away from computer systems, alarm systems
and other possible sources of disturbance. The stationary unit is supplied with a wire
antenna connected to binding post 12.
To increase the range a tuned antenna ANQ 800-1 connected using coaxial cable
RG58 (impedance 50Ω) with a maximum length of 15 m can be installed. In this case
the antenna should be positioned out of doors, visible and away from metal structures
in the position that best suits the number of photoelectric cells installed.
Photoelectric cells range:
Pair of surface mount transceiver photoelectric cells
Stationary transceiver unit
3V lithium battery pack
Optional external antenna for 868 MHz transceivers
12 m under all weather conditions.
12
Tabla de contenido
