Dolmar AT-3724 U Manual De Instrucciones página 10

Vibration
Model
AT-3724 U
AT-3731 C
• The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of exposure in
the actual conditions of use (taking account of all parts
of the operating cycle such as the times when the tool
is switched off and when it is running idle in addition to
the trigger time).
For model AT-3724 U
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
....................... Take particular care and attention.
............ Read instruction manual.
...................... Danger; be aware of thrown objects.
...................... The distance between the tool and
bystanders must be at least 15 m.
............... Keep bystanders away.
.............. Keep distance at least 15 m.
15m(50 )
FT
..................... Avoid kickback.
...................... Wear a helmet, goggles and ear
protection.
...................... Wear protective gloves.
...................... Wear sturdy boots with nonslip soles.
Steeltoed safety boots are
recommended.
...................... Do not expose to moisture.
............. Top permissible tool speed.
Cd
............... Only for EU countries
Ni-MH
Li-ion
Do not dispose of electric equipment
or battery pack together with
household waste material!
In observance of the European
Directives, on Waste Electric and
Electronic Equipment and Batteries
and Accumulators and Waste
10
Left hand
2
a (m/s ) Uncertainty K (m/s
h
2.5 1.5
2.5 1.5
ENG901-1
END116-1
Right hand
2 2
) a (m/s ) Uncertainty K (m/s
h
2.5
2.5
For European countries only
EC Declaration of Conformity
The undersigned, Rainer Bergfeld, as authorized by
Dolmar GmbH, declares that the DOLMAR
machine(s):
Designation of Machine:
Cordless Grass Trimmer
Model No./Type: AT-3724 U
Specifications: see "SPECIFICATIONS" table.
are of series production and
Conforms to the following European Directives:
2000/14/EC, 2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN/ISO11806
The technical documentation is on file at:
Dolmar GmbH,
Jenfelder Straße 38, Abteilung FZ,
D-22045 Hamburg
The conformity assessment procedure required by
Directive 2000/14/EC was in Accordance with annex V.
Measured Sound Power Level: 94 dB (A)
Guaranteed Sound Power Level: 96 dB (A)
For model AT-3731 C
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
....................... Take particular care and attention.
............ Read instruction manual.
...................... Danger; be aware of thrown objects.
...................... The distance between the tool and
............... Keep bystanders away.
.............. Keep distance at least 15 m.
15m(50 )
FT
Applicable standard
2
)
1.5 EN786
1.5
Batteries and Accumulators and their
implementation in accordance with
national laws, electric equipment and
batteries and battery pack(s) that
have reached the end of their life
must be collected separately and
returned to an environmentally
compatible recycling facility.
30. 7. 2013
Rainer Bergfeld
Managing Director
bystanders must be at least 15 m.
ENH024-8
END020-3