General information
This complete NOVA Nova Steam Station
Star Deluxe consists of an iron with a
separate steam generator. The iron is
equipped with a steam button to give a
shot of steam, and a temperature-control
dial to set the temperature to the required
level.
Operation and
controls
See figure 1.
The appliance includes the following
components:
1 Steam control button
2 Temperature-control dial
3 Temperature indicator light
4 Double-insulated power cord and
steam hose to iron
5 Indicator light "water reservoir empty"
6 On/off switch steam generator
7 Indicator light "steam ready"
8 Calc Clean descaling cap
9 Connector with power cord and plug to
mains
10 Removable water reservoir
11 Holder
12 Iron
13 Reservoir lock
Steam control button
Pressing this button delivers a steamblast.
Temperature-control dial
Sets the right ironing temperature for each
garment.
8
Steam Station Star Deluxe Article 320300
Temperature indicator light
Indicates the temperature of the iron. The
indicator goes on and off during ironing.
Indicator light "water reservoir empty"
Indicates you need to refill the water
reservoir.
On/off switch steam generator (with 'on'
indicator light)
Switches the steam generator on and off.
The indicator light in the switch always
goes on when you set the on/off switch
steam generator to "I" position.
Indicator light "steam ready"
Indicates the steam is ready to use.
Before using for the first time
• Read and follow these instructions
carefully. Keep this manual for future
reference.
• Make sure that the mains voltage is
the same as that indicated on the type
plate on the appliance.
• Always turn the temperature-control
dial to 'min' before putting the plug in
the wall socket or removing the plug
from the socket.
• Always take care when ironing in the
vicinity of children. Never leave an
iron unattended when it is switched
on, even when the iron is standing on
an ironing board.
• Touching hot metal parts, hot water or
steam can cause burns. Take care
when touching hot parts of the steam
generator and iron.
1 Before using the iron for the first time,
verify that the mains voltage stated on
the base of the steam generator is the
same as your mains voltage.
2 Remove all labels and stickers that may
be attached to the iron.