Led Flashlight; Technical Specifications - Midland Enerjump Mini Jump Manual De Usuario

CHARGING A MOBILE DEVICE WITH USB PORT
• Plug the USB cable to the USB Quick Charge 5V/9V output port
of Enerjump Mini.
• Should the supplied USB cable be not compatible with your
device, use your own recharging cable.
• Push the key to turn on ENERJUMP MINI. The charging lights
will be on when charging.

LED FLASHLIGHT

Press the switch button for 3 seconds to turn on the flashlight.
Press it again slightly and the flashlight will light up in 4 different
modes in sequence (normal, strobe, SOS, off).

TECHNICAL SPECIFICATIONS

Size
Weight
Charging hours
Nominal capacity
Input
Output
Car starter
Starting current
Peak current
Temperature range
Specifications are subject to change without notice.
For information about the warranty please visit:
www.midlandeurope.com.
The product complies to CE and is free use in all EU countries.
5V – 2.4A / 9V – 2A
14
170x81x17mm
250g
About 2h
6000mAh
5V-2A
12V
150A
300A
-10°C / +60°C