Cleaning And Maintenance - Livington PRIME Instrucciones De Uso

CLEANING AND MAINTENANCE

1 Cleaning the Appliance:
1) All routine maintenance and repair tasks should be carried out following display of
a charged appliance.
2) Following every period of use the dust collection container should be cleaned.
3) When not in use, the appliance should be kept in a cool and dry place, and not be
exposed to direct sunlight or dampness.
4) Ensure that the appliance is kept separate from the power supply and the ON/OFF
buttons switched off; wipe it down with a damp, cotton towel (with water or a
neutral cleaner), without letting water or cleaner get inside and causing defects.
II Brush Cleaning:
Push the lock in the direction of the arrow and remove the brush from the top. See figure 24.
STORAGE OF THE APPLIANCE
In the event of non-use, store the appliance, as in figure 25, with the 3-in-1 combination brush and
the additional brush in the charging station.
TROUBLESHOOTING
NB: if you are aware of one of the following problems, immediately switch off the appliance, in
order to not damage and to prevent further defects.
Faults
No longer functions
Deterioration of suction
Dust escaping while in ope-
ration
Brush does not rotate
Possible Cause
Rechargeable battery is weak
Switch is not on
Dust collection container is
full
Suction hole is clogged
Filter is clogged
Dust filter is dirty
First light is flickering
Solution
Recharge the battery
Turn the switch to ON
Empty the dust collection
container
Clear the blockage
Clean the filter
Switch off the appliance and
clean the filter
Clean the brush and restart
the appliance
EN EN
13