Rear Panel; Power Connector - TECshow DMC-2000 Manual De Usuario

Rear Panel

1. Use socket
Used to connect a computer.
2. Power switch: (adaptor / usb power)
Ser the switch to adaptor when using external DC adaptor. Set
to USB bus power when using power from computer via USB

3. Power connector

Plug in power adaptor here.
4. Rca output
The MASTER output connects the unit to your main amplifi-
er. The RECORD output can be used to connect the mixer to
the record input of a recording unit, thus enabling you to re-
cord your mix. The BOOTH output can be used as an output
source for monitors or booth playback.
5. Balanced xlr output
The XLR BALANCED OUTPUT selection has left and right XLR
outputs for balanced operation of stereo outputs.
6. Convrtible phono/line input
The unit has 2 CONVERTIBLE PHONO/LINE RCA INPUTS when
switch to the PHONO position you may use any turntable with
a magnetic cartridge. When the switch is in the LINE position
you may connect any line level device (MP3, CD, Tape, ect).
Now you may plug the RCA's from your playable medium into
each input to be connected yo their respective CHANNELS.
7. Input level
This knob is used to adjust the input level.
dmC-2000
ENGLISH VERSION
p. 11