3. Check the vacuum hose for clogging material after
every use.
4. Clean the secondary filter once each month. This
filter provides extra vacuum motor protection.
5. Clean the exhaust filter once each month. Press
down on the top of the filter cover and remove the
cover to gain access to the filter.
6. The brush on your vacuum is adjustable for
maximum brush life. When the brush bristles
shorten with wear, you can lower the brush shaft
closer to the carpet and get extended life from the
shorter brush bristles. Follow these steps:
a. Remove the brush plate.
b. Look closely at the two white bearing blocks
and note that a number (1) shows on each
block.
c. Remove the brush assembly from the brush
housing.
d. Hold the brush and rotate each of the two
white bearing blocks until you see the number
(2) on each block (Figure 2).
FIG. 2
e. Reinstall the brush so the number (2) shows
on each block.
f.
Put the brush plate back in place.
UV-1600 (07- -05)
Home
Find... Go To..
STORING MACHINE
Store machine in a dry area in the upright position.
ATTENTION: Do not expose to rain. Store
indoors.
RECOMMENDED STOCK ITEMS
Refer to the Parts List section in this manual for
recommended stock items. Stock Items are clearly
identified with a bullet preceding the parts description.
See example below:
OPERATION
7