Specifications; General Specifications; Frame/Bike Customization - Turbo KENEVO Manual De Usuario

ITEM
HEADSET
HEADSET
SEAT COLLAR DIAMETER
SEATPOST DIAMETER
DERAILLEUR HANGER
REAR HUB SPACING
The specs below are the stock configurations for each model.
WHEEL /
MODEL
TIRE
KENEVO 27.5 x 2.6
The shock extension length, bottom bracket (BB) height and head tube angle all have two settings based on the
1
Flip Chip position. The stock configuration for the Flip Chip is in the lower position (highlighted in BOLD). Refer to
section 9.4 on page 19 for information about adjusting the Flip Chip.
KENEVO frames are available in a 27.5" configuration, with different wheel/tire and/or fork options. Each of these
variables will affect the bottom bracket height and head angle of the frame, as well as the general ride characteristics of
the bike. If you decide to make changes to the stock configuration, e.g. changing the tire size or fork travel, please check
with your Authorized Specialized Retailer what components, if any, need to change for compatibility.
WARNING! Changing the frame configuration can alter the BB height and/or the head tube angle,
which can have negative effects on the bike's handling characteristics and ride quality. In certain
cases, it can also result in frame/shock incompatibility. Please refer to your Authorized Specialized
Retailer before making any modifications to the wheel/tire size, shock, shock extension and/or
fork length.
MAXIMUM FORK LENGTH AND TIRE SIZE:
WHEEL SIZE
27.5"
WARNING! Specialized frames are compatible ONLY with forks that have a specific range of travel
(see table). Use of different styled forks or forks with longer travel may result in catastrophic
failure of the frame which may result in serious personal injury or death.
WARNING! While the 27.5"frame is generally compatible with tires up to 27.5 x 2.8, tire
dimensions can vary depending on the manufacturer, and not all forks are designed to accept a
larger tire. Always check with the fork manufacturer regarding required clearances.

10. SPECIFICATIONS

10.1. GENERAL SPECIFICATIONS

PART # SPECIFICATION
S182500005 1 1/8" UPPER / 1.5" LOWER DROP-IN BEARINGS
1 1/8" UPPER / 1.5" LOWER DROP-IN BEARINGS FOR 1 1/8"
S192500020
STEERER
S184700004 38.6mm
34.9mm
S172600001 HGR MY18 MTB THRU AXLE DER HANGER
S170200003 AXL MY17 EPIC HT THRU-AXLE 148mm X 12mm
SHOCK SHOCK
TRAVEL EXTENSION
180 110 / 113

10.2. FRAME/BIKE CUSTOMIZATION:

MAX FORK TRAVEL
180 mm
SHOCK FORK
STROKE TRAVEL
1
230 x 62.5 180
MAX REAR TIRE SIZE
27.5 x 2.8
BB HEAD TUBE
HEIGHT ANGLE
1 1
345 / 351 64 / 64.5
CHAINRING SIZE
32 - 34t
20