Charging Instructions - Lift-Rite LEC 1000 M Manuel De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Battery
If the truck is not to be used for the next 30 minutes, the charger
should be connected to a wall outlet with the included charging
cable. If this practice is adhered to, the truck will always be
ready for use.
If batteries become completely discharged, full charging
(approx. 12 hours) is required prior to any further use of the
truck.

Charging instructions

• Depress the emergency stop key and turn it 90 degrees.
• Connect the included charging cable to the truck.
• Then connect the other end of the charging cable to a 230 V
wall outlet, 110 V for North America and check whether the
yellow LED on the charger lights. Automatic charging is now
performed.
Once charging is completed, the charger enters the equalising
charge mode. This is indicated by both the yellow and green
LEDs on the charger remaining lit.
As long as the green LED is lit, equalising charging of the battery
is performed. Main charging has been completed, and in this
mode, there is no risk that the batteries will become damaged.
As such, the truck can remain connected to the wall outlet for a
long time.
• Disconnect the charging cable from the wall outlet when
charging has been completed and truck will be used.
• Then disconnect the charging cable from the truck.
• Turn the emergency stop key back and pull it up to the travel
position.
© Lift-Rite 222979-002
13
Tabla de contenido
loading

Este manual también es adecuado para:

Lec 1000 muPst plus

Tabla de contenido