Auto Power Off; Important; Scan Operating Mode - Promax PROPOWER - 5 Manual De Instrucciones

c) UNITS
The PROPOWER-5 permits to select the level units between dBm and dBm/Hz.
d) TIME
To enter the time select the TIME field and press the rotary selector. Firstly, turn
the rotary selector to change the minutes field. Next press the selector again to
modify the hours and finally press it once again to confirm the new time.
e) DATE
To enter the date select the DATE field and press the rotary selector. First change
the year field, then the month and finally the day.
The parameters which may be modified on the second page of the global
configuration menu of the unit are as follows:
f)

AUTO POWER OFF

This field permits to activate (ON) or deactivate (OFF) the POWER-OFF function.
When this function is ON, the unit automatically turns off when it has remained
inactive for a period of 10 minutes.
g) BEEP
This function permits to activate (ON) or deactivate (OFF) the PROPOWER-5
beeper. When it is on, it sounds on pressing any key or when turning the rotary
selector in order to alert the user.
h) LANGUAGE
This field permits to select the language between: ESPAÑOL, FRANÇAIS,
POLSKI, ENGLISH and DEUTSCH.
To leave the global configuration menu, just press the key of the operating mode
you wish to accede.
The lower line of the screen shows the version of the unit control software (1.25
in previous figure)

4.2.2 SCAN operating mode

The SCAN operating mode shows, in a single screen, the signal level of all the
active channels in the channel plan by means of a bar-graph. In addition, the exact level
of any particular channel may be measured by simply placing the marker over it.
Page 16
Figure 7.- Global configuration. 2/2.
USER'S MANUAL. PROPOWER-5

IMPORTANT

07/2006