Installation; Undermount; Undermount Installation - Conglom QK95R Manual Del Usuario

Installation

UNDERMOUNT INSTALLATION

PREPARING THE AREA
NOTE:
Undermount sinks are mounted from below the counter. It is highly
recommended that undermounting be performed by a professional
installer. Improper installation will void the warranty.
- Place the template (1A) on the desired counter space
surface . Keep in mind that the typical setback is
3 1/2 - 4 in . (89 mm - 102 mm) from the front of the
counter to the sink bowl (depending on the cabinet
structure, the counter overhang, the type of sink bowl, and
the deck size).
- Make sure the template (1A) is parallel to the front of the
counter .
QK95R

UNDERMOUNT

1A
Undermount installation
CUTTING THE COUNTER
CAUTION: Always wear safety goggles and gloves when
using power tools to prevent personal injury .
- Ensure that the template (1A) is placed so that the sink
will clear all objects and the mounting hardware can be
installed . Secure the template to the counter top using
masking tape .
- Place a support underneath the cut-out portion of the
counter to prevent it from falling during cutting . Use an
appropriate saw to cut along the undermount cutline .
- Drill a 1-3/8 in . (35mm) mounting hole for your faucet in a
desired location that is at minimum 2 in . (51mm) from the
sink cut-out to the hole center .
Faucet Hole Location
2 in. (51 mm) Minimum
Tape
6
Setback
3 1/2 - 4 in .
(89 mm - 102 mm)