Pre-Installation; Planning Installation; Tools/Materials Required; Parts Required - Conglom QK95R Manual Del Usuario

Pre-Installation

PLANNING INSTALLATION

This sink may only be mounted to the underside of the countertop (undermount) that is at least 35 in . (889 mm) in
length and 3/4 in . (19 mm) in thickness .
Protect the entire surface of the product during installation to prevent damage .

TOOLS/MATERIALS REQUIRED

Measuring tape
Saber-saw or
Jig-saw
Silicone sealant
Flathead
screwdriver
Safety gloves
PARTS REQUIRED (NOT INLCUDED)
NOTE:
Parts not shown to actual size.
QK95R
Carpenter's square
Electric drill with 3/8 in .
(10 mm) drill bit and 1 in .
(25 .4 mm) and 1 3/8 in . (35 mm)
hole saw for faucet hole drilling
Pencil
Hacksaw
Tail pipe (2)
4
UNDERMOUNT
Supply lines (2)
Wrenches (2)
Pipe wrench
Thread Seal
Safety goggles