Puky PUKYMOTO Manual De Instrucciones página 8

PUKYMOTO PUKYMOTO
torque with which a screw is tightened is too
low, the connection may still be too loose and
therefore unsafe. If the torque is too high,
screws and other parts may be damaged or
destroyed.
Figure 1: Remove transport restraint (paper-
board, rubber band) and take off the washer.
Figure 2: Slide the steering tube onto the fork
shaft, until it reaches the stop. Make sure that
the steering head is aligned correctly (!) Add
the washer. Align the nibs on the fork shaft to
face backwards (!).
Figure 3: Slide the handlebar all the way onto
the fork shaft, and tighten the screw. Align the
slot in the handlebar with the rear (!) Firmly
press down on the spherical cap until it snaps
into position.
Figure 4: Unscrew screws from rear axle.
Figure 5: Insert the rear axle into the frame in
the desired orientation - Seat height Min
(27cm) or seat height Max (29 cm).
Operation
Figure 6: Adjust the seat height by turning the
rear axle - Seat height Min (27cm) or seat
height Max (29 cm).
8