Alarm Function; Deactivating The Alarm; Switching Off The Alarm; Light/Reading Lamp - Beurer WL 75 Instrucciones De Uso

4. The minutes flash in the display. Set the minutes using the
5. The year flashes in the display. Set the year using the
(Y)
6. The month flashes in the display. Set the month using the
(M)
7. The day flashes in the display. Set the day using the
(D)

8.2 Alarm function

Setting the alarm
NOTE: If you set the alarm using the buttons on the Wake-up Light, you can select the alarm time and the
alarm tone. If you set the alarm using the 'beurer LightUp' app, you can also select the alarm days, snooze
time, and simulated sunrise (Wake-up Light gradually becomes brighter over time).
To set the time using the buttons on the Wake-up light, proceed as follows:
1. Press the Set button on the device once. 'SET Alarm' appears on the display. Wait three seconds
until the alarm symbol '
2. Use the / buttons to select either '
3. The alarm hour flashes in the display. Set the alarm hour using the / buttons. Confirm with the Set button.
4. The alarm minutes flashes in the display. Set the alarm minutes using the
Set button.
5. Alarm tone wake-up melody 1–6
the desired alarm tone. Confirm with the Set button to activate alarm.
The simulated sunrise starts before the set alarm in order to prepare the body for waking up. The alarm only
goes off afterward.
Activating the alarm
To activate the alarm, press the Alarm button on the Wake-up light repeatedly until 'ALARM1', 'ALARM2' or
'ALARM1 and ALARM2' appears in the display.

Deactivating the alarm

To deactivate the alarm, press the Alarm button on the Wake-up light repeatedly until 'OFF' appears in the
display.
Activating the snooze function
When the alarm sounds, lightly touch the On/Off button
snooze time in the 'beurer LightUp' app.

Switching off the alarm

When the alarm sounds, press the On/Off button
time in the 'beurer LightUp' app.

8.3 Light/reading lamp

NOTE: You can switch on the light using the 'beurer LightUp' app or the buttons on the Wake-up Light.
To switch on the light using the buttons on the Wake-up Light:
1. Briefly press the On/Off button
2. To switch the light off again, press the On/Off button
3. You can use the brightness buttons + - to set the brightness.
flashes on the display.
'
(Alarm 1) or '
'
or radio
on the inserted device. The light comes on.
/ buttons. Confirm with the Set button.
/ buttons. Confirm with the Set button.
/ buttons. Confirm with the Set button.
/ buttons. Confirm with the Set button.
(Alarm 2). Confirm with the Set button.
'
flashes on the display. Use the
to activate the snooze function. You can set the
to activate the snooze function. You can set the snooze
again. The light goes off.
6
/ buttons. Confirm with the
/ buttons to select