Intended Use - OK. OPN 100 Manual Del Usuario

INTENDED USE

This product is intended to serve as a night light in nurseries or children's
rooms. Provided with suction cups it can be fixed on even surfaces.
COMPONENTS
A. LED light
B. ON/OFF/MODE touch button
C. Charging cable with USB A- and Micro-USB-plug
D. Suction cups
E. Micro-USB charging socket
CHARGING THE NIGHTLIGHT
Connect the USB cable to a USB-charger. Connect the Micro-USB-
1
plug with the Micro-USB-charging socket of the night light. The
charging process starts and will need 2-3 hours to fully charge an
empty battery.
Note: When the battery is low, the light will flashing in red. During
charging the light remains red and changes to green light once the
battery is fully charged.
OPERATION
Note: With fully charged battery the light time is up to 7 hours for white
light and up to 5-6 hours in color changing mode.
Place the night light on an even surface using the provided suction
2
cups.
Touch ON/OFF/MODE several times at following sequence
3
for choosing light mode: 1. white > 2. yellow > 3. light blue >
4. purple > 5. orange > 6. green > 7. blue > 8. red > 9. color
changing mode with 7 colors.
The light switches off automatically after 1 hour continuous
4
battery operation. To switch off the light manually, touch ON/OFF
repeatedly until the light switches off.
Note:
When the light is turned on longer than 10 seconds, touch ON/OFF
once, the light will be switched off.
IM_OPN100_150706_V09_HR.indb 13
13
EN
6/7/15 5:31 PM