Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Power Supply
•
Flap the rubber cover down.
•
Connect the plug to a properly installed 230 V,
50 Hz wall outlet. Connect the power adaptor
to the 6 V DC IN socket (9) of the unit.
•
Ensure that the mains power matches the
specifications on the type label.
Caution:
•
Only use the supplied AC power adaptor for
this unit; do not use for other appliances.
•
Only use AC power adaptor 6 V (
any other power adaptor can damage the
unit.
Note:
Disconnect the power adaptor from mains
power during longer periods of non-use.
Insert Batteries (batteries not supplied)
•
Open the battery compartment (10) at the rear,
loosen the screw with a screw driver.
•
Insert 4 batteries type UM 2/R14 1.5 V.
Observe correct polarity (see battery compart-
ment)!
•
Close the battery compartment and tighten the
screw.
•
To avoid battery leakage remove the batteries
during longer periods of non-use.
Note:
•
Battery operation is automatically deactiva-
ted after connecting the power adaptor.
•
Exchange the batteries as soon as the
brightness of the status indicator POWER (5)
decreases.
Warning:
Do not subject batteries to heat or direct sun-
light. Do not dispose of batteries by burning.
Danger of explosion!
Caution:
•
Different battery types or new and used
batteries must not be used together.
•
Do not dispose of batteries with the house-
hold waste. Return exhausted batteries to
collection points or your dealer.
Basic Operation
Turn Unit Off
The unit is turned off by setting the function selec-
tor (3) to OFF Position.
Volume
Turn the VOLUME knob (1) to set the desired
volume.
AUX IN Socket
Connect analog playback devices here. Listen
to connected devices, such as MP3 players, CD
players, etc.
•
Flap the rubber cover down.
•
Connect the external device via 3.5 mm stereo
),
jack to AUX IN (8).
•
Set the function selector (3) to FM or AM posi-
tion. The unit automatically turns to AUX IN
operation. The radio sound is muted.
•
The unit plays the sound from the connected
external device. Turn the VOLUME knob (1) to
set the desired volume.
•
Operate your external device as described in
its user manual.
Note:
Set the volume of the external device to an
appropriate level.
Listen to Radio
•
Set the function selector (3) to select the de-
sired frequency band.
VHF = FM, Medium Wave = AM (Mono)
•
Turn the frequency selector (6) to tune into your
favorite station. The upper dial scale shows the
FM frequencies. The lower dial scale shows
the AM frequencies.
•
The flexible antenna (7) receives FM stations.
•
The AM antenna is integrated in the unit. Turn
the unit for best reception. This frequency band
broadcasts programs in mono only.
Cleaning and Maintenance
•
Before cleaning disconnect the unit from mains
power supply.
•
Clean the casing with a damp cloth without
detergents.
21
Tabla de contenido
