Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 52
3
Operation

3.1 Intended use

This appliance is intended only for
household use; it is not suitable for
professional use.
It is designed for chopping small
amounts of solid food only.
3.2 Initial use
Clean the appliance parts before ini-
tial use (see 4.1).
3.3 Operation
1. Place your appliance on a hard
and flat surface on its non-slip
rubber base.
2. Remove motor unit (4) and
middle cover (3) from the glass
container.
3. Place the chopper blade (6) on fi-
xed shaft (2) holding the plastic
section.
4. Put the ingredients you want to
prepare into the glass container
(1) (see. 3.4).
5. Place middle cover (3) on glass
container (1) (silicone seal facing
down). Then, place the motor
unit (4) on top.
10 / EN
WARNING: Fit
the middle cover (3)
on glass container.
A
Otherwise, motor
unit (4) will not be
seated securely and
appliance will not
start.
6. Plug in the appliance.
7. Run the desired speed pressing
the operation switch (5) (see.
3.4).
8. Do not use the appliance con-
tinuously for more than 10 se-
conds. Turn off the device when
used for more than 10 seconds
and wait for 1 min. before opera-
ting again.
WARNING:
When you do not
exceed 10 seconds
A
in intermittent uses,
you can operate the
appliance until the
end of the process
by waiting for a
couple of seconds.
Chopper / User Manual
Tabla de contenido
loading

Tabla de contenido